SolarEdge EV Series User Manual

Error code Displayed Error message Description and Troubleshooting
-or-
Tap Charge Now on the EV
Charger tab of the Monitoring
App
1CxC
Vent not supported
Disconnect from EV
The SolarEdge EV charger does not
charge vehicles that require
ventilation while charging. If this
error occurs, the vehicle cannot be
charged.
1CxE;1CxF
Charging retries ended
Disconnect from EV
Charging retries ended
Disconnect the EVCharger cable
from the vehicle.
Contact SolarEdge Support.


Chapter 5: Errors and Troubleshooting 73
EV Charging Single Phase Inverter Guide MAN-01-00588-1.1

SolarEdge EV Series Specifications

General

AC Frequency	60 Hz
Protection Rating	IP65
AC Voltage	208/240 V
EV Charger Output Voltage	208/240 V
EV Charger Max. Output Current	32 A
Communication	Ethernet, Wi-Fi
Safety	UL1741
Operating Temperature Range	-25°C to 60°C