What to do if SolarMax Inverter shows 'No mains' error?
If your SolarMax Inverter displays a 'No mains' error, it means either there is no mains voltage present or the AC supply has been interrupted. To resolve this, check the AC supply to ensure it is properly connected and functioning.
Why does SolarMax 15MT2 show 'Vdc too high' error?
The 'Vdc too high' error on your SolarMax Inverter indicates that the DC input voltage at the specified DC connection is exceeding the acceptable limit. To resolve this, immediately switch off the DC disconnector Q1 and disconnect the PV generator from the inverter. Then, thoroughly check the dimensioning of the PV generator to ensure it is within the inverter's specified operating range.
Identifies the intended audience and instructs on manual storage.
Explains the meaning of symbols used throughout the manual and on the inverter.
Defines intended use and highlights critical safety warnings.
Illustrates the internal functional components and their interconnections.
Details the physical layout, controls, and dimensions of the inverter.
Provides guidelines for safely transporting and storing the inverter.
Outlines considerations for protecting the PV plant from lightning strikes.
Lists package components and describes the physical mounting procedure for the inverter.
Details the process and options for connecting the inverter electrically.
Covers AC connection procedures, fuses, and cable cross-sections.
Explains how to connect the DC inputs from the PV modules to the trackers.
Explains RJ45 sockets for RS485 and Ethernet data communication.
Details the procedure for powering the inverter on and off safely.
Guides through the one-time setup process upon first startup.
Describes the inverter's front display, its information, and navigation.
Shows the default screen and lists electrical parameters that can be measured.
Describes how to set operating parameters and advanced functions.
Explains how to initiate and perform the automatic test procedure.
Overviews MaxTalk, MaxVisio, MaxWeb xp, and SolarMax Web Portal.
Details device address, Ethernet, IP, Netmask, and TCP port configuration.
Lists optional accessories like data loggers and displays.
Explains the meaning of status messages and LED indicators.
Describes status messages during booting, mains operation, and communication activity.
Provides support contact details and an overview of diagnostic measures.
Details warning, failure, and error messages and their corrective actions.
Describes blocking causes, remedies, and basic maintenance tasks.
Comprehensive technical data for different inverter models.
Graphical representations of efficiency and temperature-based power reduction.
General| Max. input voltage | 1000 V |
|---|---|
| Protection class | IP65 |
| Output Power | 15000 W |
| Frequency | 50/60 Hz |
| Protection Features | Overvoltage, Overcurrent, Short Circuit, Overtemperature |
| Max. DC power | 15000 W |
| Nominal AC power | 15 kW |
To Next Page
