To Next PageTo Next PageWhat does it mean if my SolarMax 2000S Inverter displays 'Temp. limitation'?
If your SolarMax Inverter displays 'Temp. limitation', it indicates that the internal temperature is too high, and the device is reducing output. Check the function of the external fan, and inspect and clean the fan grille.
Details on the physical installation process and mounting the inverter unit.
Important notes, safety warnings, and environmental considerations for inverter installation.
Step-by-step guide for assembling the AC cable socket connector.
Information on using RJ45 sockets for communication and recommended connectors.
Guidelines for selecting appropriate fuses and cable cross-sections for AC and DC connections.
Details on the requirement and connection of a second protective earth conductor.
Diagram showing how to connect additional surge arresters on the DC side.
Steps to follow when powering up the SolarMax inverter.
Steps to follow when powering down the SolarMax inverter.
Instructions for safely removing the inverter from its mounting.
Table detailing configurable parameters based on regional settings.
Table detailing configurable parameters specific to different SolarMax models.
Explanation of how high temperatures affect inverter output and potential shutdown.
Step-by-step guide for the first-time setup of the inverter.
Explanation of why the correct country setting is crucial for inverter operation.
Details on the status signalling contact and its configurable settings.
Description of the Auto Test procedure according to Italian standard DK 5940.
Procedure for initiating the Auto Test function on the inverter.
Details of the maximum voltage, minimum voltage, frequency tests.
Procedure for testing the maximum voltage monitoring threshold.
Procedure for testing the minimum voltage monitoring threshold.
Procedure for testing the maximum frequency monitoring threshold.
Procedure for testing the minimum frequency monitoring threshold.
Description of the front panel graphics display for system parameters and status.
Explanation of the LED indicators for device status (On, Startup, Mains, Error, Alarm).
Explanation of the symbols used for menu navigation and operation.
Overview of the main menu, submenus, and navigation methods.
Accessing and viewing daily, monthly, yearly, and total statistics.
Adjusting country, limit values, language, time, date, and network settings.
Displaying device type, firmware version, and commissioning date.
Messages related to the inverter's startup phase.
Messages indicating status during mains operation.
Messages indicating malfunctions and their causes.
Messages indicating device errors and their causes.
Table of alarm messages, their LED indication, and associated causes.
Table of alarm messages, their LED indication, and associated causes.
General recommendations and contact information for PV system fault resolution.
Steps for resolving faults indicated via the inverter's graphics display.
Diagnosing and resolving malfunctions like AC/DC voltage issues, frequency, and faults.
Addressing device errors, fan failures, temperature limits, and sensor issues.
Routine maintenance checks and procedures, including fan replacement.
Description of MaxTalk PC software for inverter queries and settings.
Description of MaxVisio for PV systems without remote monitoring.
Description of MaxWeb for monitoring PV installations via the internet.
Accessing PV system data and analysis options via the web portal.
Settings required for connecting the inverter to communication interfaces.
Setting a unique address for each inverter in a network.
Configuring the Ethernet interface (on/off).
Setting the IP address and subnet mask for the network.
Setting the required TCP port for inverter communication.
Block diagram and description of the 2000S/3000S model architecture.
Block diagram and description of the 4200S/6000S model architecture.
Description of integrated safety mechanisms like fault current monitoring.
Overview of the inverter's control functions managed by the DSP.
Detailed specifications for 2000S/3000S models, including input, output, and system data.
Detailed specifications for 4200S/6000S models, including input, output, and system data.
Definitions of symbols and terms used in the manual.
Performance data including efficiency curves and detailed tables for all models.
Detailed efficiency data for the SolarMax 4200S model.
Detailed efficiency data for the SolarMax 6000S model.
Details of the Sputnik guarantee, coverage, and 'free of charge' conditions.
Cases where the guarantee does not apply and its compatibility with EU directives.
Options for extended services and limitations on Sputnik's liability.
Details on governing law and the exclusive place of jurisdiction.
Declaration confirming compliance with EU directives and standards.
Information on where to find country-specific certifications.
General
