16
4 Installation
4�1 Transport and storage of the data logger
Ensure that the ambient conditions during transport and storage are within the specied
limits (see Section 10).
4�2 Scope of delivery
Please check that the following parts are included:
Quantity Description
1 MaxWeb XPN
1 Installation manual
1 Plug-in power supply unit 230 VAC / 15 VDC
1 WLAN antenna
4�3 Siting
Please note the following when siting your MaxWeb XPN:
MaxWeb XPN meets the requirements of protection class IP20 and is therefore only
suitable for installation in dry, clean places. For outdoor installation or operation
under adverse conditions, the device must be encased in an additional casing that
meets the requirements of the required protection class.
The ambient temperature must be between – 20 ° C and + 40 ° C.
To connect the plug-in power supply unit, a 230-V power socket must be within reach
of the connection cable.
Note
The plug-in power supply unit is an EU plug. If the MaxWeb XPN is intended to
be used outside the EU, a corresponding adapter is required.
4�4 Device installation
The device can be hooked into a 35-mm top-hat rail in a switch cabinet.
To Next Page
Loading...
