Need help?Do you have a question about the SolarMax MaxWeb xp and is the answer not in the manual?
Defines the applicability and purpose of this installation manual.
Identifies the intended audience and required qualifications for installation.
Specifies the importance of keeping the manual accessible for system operators.
Explains the meaning of safety and information symbols used throughout the manual.
Outlines the intended functions and applications of the MaxWeb xp data logger.
Provides critical safety warnings and precautions for installation and operation.
Details the various ports and their purposes on the MaxWeb xp device.
Explains the meaning of the operational status LEDs on the MaxWeb xp.
Specifies ambient conditions for safe transportation and storage of the device.
Lists the components included in the MaxWeb xp package and GPRS version.
Provides guidelines for selecting an appropriate location for installing the MaxWeb xp.
Describes the physical mounting procedures for the MaxWeb xp device.
Lists devices and modules that can be connected to the MaxWeb xp data logger.
Details the recommended cabling and connection methods for the MaxComm network.
Explains the importance of assigning unique addresses to devices in the network.
Guides on configuring the MaxWeb xp for operation within a LAN network via Ethernet.
Specifies requirements and precautions for powering the MaxWeb xp data logger.
Advises on updating recorded data before making changes to the MaxComm network.
Instructions for powering the device on, off, and restarting from standby mode.
Covers basic configuration aspects like connection cables and IP address settings.
Details router port requirements for MaxWeb xp Ethernet connectivity.
Provides recommendations and instructions for using the MaxWeb xp with a SIM card.
Guides through the step-by-step wizard for configuring the MaxWeb xp.
Explains how to register to obtain access data for the MaxWeb Portal.
Instructions on reconnecting cables after GPRS configuration.
Details how to activate the display interface for external displays.
Describes the procedure for connecting external displays to the MaxWeb xp.
Instructions on how to access the plant data via the MaxWeb Portal online interface.
Guides on accessing the MaxWeb xp's own user interface through the portal.
Lists the types of sensors and devices that can be connected to the expansion port.
Provides guidelines for connecting irradiance and temperature sensors to the expansion port.
Explains how to configure the expansion port and connected sensors within MaxWeb xp.
Describes connecting and using external alarm sensors via the expansion port inputs.
Details the terminal pin assignments for various connections on the expansion port.
Specifies the standard warranty duration for central inverters and accessories.
Outlines the conditions and process for claiming the manufacturer's warranty.
Details what is covered and not covered in terms of repair and replacement of devices.
States that repaired or replaced devices inherit the remaining warranty time.
Lists specific conditions and situations where the manufacturer's warranty does not apply.
Provides instructions on how to process warranty claims via the hotline.
Explains the conditions under which Sputnik may suspend the manufacturer's warranty.
Details options and conditions for purchasing extended warranty periods.
Explains that costs for service after warranty expiry are invoiced by Sputnik.
Specifies the governing law and exclusive jurisdiction for warranty matters.
General| Data Storage | Internal memory, SD card |
|---|---|
| Operating Temperature | -20°C to +60°C |
| Communication | Ethernet, RS485 |
| Protocols | Modbus TCP, Modbus RTU |
| Display | LCD |
| Measurement Inputs | Analog, digital |
| Power Supply | 24 VDC |
To Next Page
