Solax X3-PRO G2 Series User Manual

X3-PRO-10K-G2-LV
Model
X3-PRO-12K-G2-LV
X3-PRO-15K-G2-LV
4.2 AC Output
15000
16500
22.8, 21.8
24.2
Model
20000
22000
30.3, 29.0
33.6
X3-PRO-15K-G2(3D) X3-PRO-25K-G2(3D) X3-PRO-20K-G2(3D)
25000
27500
37.9, 36.3
41.8
30000
30000
45.5, 43.5
45.5
X3-PRO-30K-G2(3D)
50/60
17000
18700
25.8, 24.7
27.5
X3-PRO-17K-G2(3D)
15000
16500
39.4
43.4
Model
X3-PRO-15K-G2-LV
50/60
3~/N/PE, 127/220; 3~/PE, 220
X3-PRO-10K-G2-LV X3-PRO-12K-G2-LV
Technical Data
15000
800
360
160-650
0 553 0- 0
32/32
40/40
200
2
A:2/B:2
18000
8 00
360
160-650
300-550
/32 32
/40 40
200
2
A:2/B:2
22500
8 00
360
160-650
300-550
/32 32
/40 40
200
2
A:2/B:2
12000
13200
31.5
34.7
10000
11000
26.3
28.9
14 15
0
Yes
10000 12000 15000
“Max. MPPT power limit per MPPT”means the maximum PV production when using one of the
MPPTs only.
Technical Data
Max. inverter backfeed current to
the array [ A]d.c.
Max. recommended DC power [W]
Max. PV voltage [d.c. V]
Rated input voltage [d.c. V]
MPPT voltage range [d.c. V]
Max. PV current [d.c. ] A
Isc PV array short circuit
current [d.c. ] A
Start input voltage [d.c. V]
No. of MPPT
Strings per MPPT
DC disconnection switch
Max. MPPT power limit
per MPPT [W]
MPPT voltage range
@ full load [d.c. V]
8000
8800
12.2, 11.6
13.2
Model
10000
11000
15.2, 14.5
16.0
0.8 leading-0.8 lagging
Three-phase
50/60
12000
13200
18.2, 17.4
19.3
15000
16500
22.8, 21.8
24.2
17000
18700
25.8, 24.7
27.5
20000
22000
30.3, 29.0
33.6
3~/N/PE, 220/380, 230/400; 3~/PE, 380, 400
X3-PRO-8K-G2(2D) X3-PRO-10K-G2(2D) X3-PRO-15K-G2(2D) X3-PRO-12K-G2(2D) X3-PRO-17K-G2(2D) X3-PRO-20K-G2(2D)
Rated output apparent power [VA]
Max. output apparent power [VA]
Nominal AC voltage [a.c. V]
Nominal AC frequency [Hz]
Rated output current [a.c. A]
Max. output continuous
current [a.c. A]
THDi
Power factor range
Feed-in phase
<3%
Current (inrush) [a.c. A]
Maximum output fault
current [a.c. A]
Maximum output overcurrent
protection [a.c. A]
60 (18 μs)
100
89
0.8 leading-0.8 lagging
Three-phase
THDi
Power factor range
Feed-in phase
<3%
Current (inrush) [a.c. A]
Maximum output fault
current [a.c. A]
Maximum output overcurrent
protection [a.c. A]
60 (18 μs)
100
89
Rated output apparent power [VA]
Max. output apparent power [VA]
Nominal AC voltage [a.c. V]
Nominal AC frequency [Hz]
Rated output current [a.c. A]
Max. output continuous
current [a.c. A]
3~/N/PE, 220/380, 230/400; 3~/PE, 380, 400
Rated output apparent power [VA]
Max. output apparent power [VA]
Nominal AC voltage [a.c. V]
Nominal AC frequency [Hz]
Rated output current [a.c. A]
Max. output continuous
current [a.c. A]
0.8 leading-0.8 lagging
Three-phase
THDi
Power factor range
Feed-in phase
<3%
Current (inrush) [a.c. A]
Maximum output fault
current [a.c. A]
Maximum output overcurrent
protection [a.c. A]
60 (18 μs)
100
89
* If there are two data for this parameter, each data corresponds to the corresponding voltage.
*
*

Solax X3-PRO G2 Series Specifications

General

Model	X3-PRO G2 Series
Category	Inverter
MPPT Efficiency	99.9%
Max. DC Voltage	1100V
THDi	<3%
DC Switch	Yes
European Efficiency	98%
Communication	WiFi, Ethernet, RS485
Operating Temperature Range	-25°C to +60°C
AC Voltage Range	310V-480V
AC Grid Frequency	50/60 Hz
Warranty	10 years
Rated Power	6kW, 8kW, 10kW, 12kW, 15kW, 20kW, 25kW, 30kW
Number of MPPTs	2 or 4 (depends on model)
AC Output Power	6kW / 8kW / 10kW / 12kW / 15kW / 20kW / 25kW / 30kW
Nominal AC Voltage	400V
Protection	DC Reverse Polarity Protection, AC Short Circuit Protection, Output Over Current Protection, Output Over Voltage Protection