Soltaro Hyper Series - Battery Connection

22
6.6 Battery Connection
Battery connection diagram
B+ B-
PV1-
PV2- PV2+
PV1 +
PV Switch
ON
OFF
DRM MULTI BMS
EMS
EPS G RID
BMS
Battery Power
DC
Breaker
6.6.1 Battery Power Connection
Procedure:
STEP 1:
• Please use the pre-assembled
battery power wire in the
accessory box for connection.
STEP 2:
• The connector from wire to battery is not assembled, you
need to contact with your battery vendor for detailed
information.
A DC breaker with OCP function is compulsory to be installed
between inverter and battery. The battery may have this