Chapter 4 BIOS Setup
75
Power On by Ring An input signal on the serial Ring Indicator (RI) line
(in other words, an incoming call on the modem)
awakens the system from a soft off state.
The choice: Enabled; Disabled (default).
Wake-Up by PCI card This function allows you to enabled the system by
wake-up by PCI card.
The choices: Enabled(default); Disabled.
Resume by Alarm When Enabled, you can set the data and time at the
which the RTC (Real Time Clock) alarm awakens
the system from suspend mode. default: Disabled.
Date (of Month) Alarm Set a certain date when RTC Alarm Resume option
is Enabled to awaken the system. This option is
concurrent with Resume Time option.
Soft-Off by PWRBTN When Enabled, turning the system off by pressing
the on/off button places the system in a very low-
power-usage state.
Choices: Instant-off (default); Delay 4 sec.;
USB KB WakeUp From
S3 (S4)
This item will enable you to wake-up the system by
USB keyboard when you shut down the computer
in S3 mode.
The choices: Enabled, Disabled.
HDD Power Down When enabled and after the set time of system
inactivity, the hard disk drive will be powered down
while all other devices remain active.
Choices: Enabled; Disabled (default)
Suspend Mode After the selected period of system inactivity, the
chipset enters a hardware suspend mode, stopping
the CPU clock and possibly causing other system
devices to enter power management modes.
Choices: Enabled; Disabled (default)
To Next Page
Loading...
