Sonoscape S22 User Manual

3 Preparing the System
Basic User Manual 25
Connect the foot switch to the foot switch port of the system as the gure shows below.
Used for image
freezing
Used for printing
Ultrasound system
Foot SW
3.7.2 Connecting the Video Printer
VIDEO OUT
PRINT REMOTE
VIDEO INPUT
Ultrasound system Video printer
Connect the video printer to the system by BNC cable and Remote Control cable provided by the manufacturer.
You can refer the installation method as the above figure shown. The video printer can work without any
congurations after a successful connection.
3.7.3 Connecting the Network Printer
■ Printer Setup
1. Connect the printer to the system, and turn on the printer. The printer settings are displayed as below.
2. Press
OK
on the control panel menu of the printer.
3. Press or to select
Network Cong
, and then press
OK
to conrm.

Sonoscape S22 Specifications

General

Brand	Sonoscape
Model	S22
Category	Medical Equipment
Language	English