4 Customizing Your System
Basic User Manual 49
Item Description
Service List Select the QR server.
●
Select Append from the drop-down list beside Service List, input the relevant
parameters information and click Add to add a new server.
●
Select any server from the drop-down list and click Delete to delete the server.
Remote Host Name Enter the name of the QR server.
IP Address Set the IP address of the QR server.
After the setting, click Ping to test the connection.
DICOM AE Title Set the Application Entity (AE) title of the QR server.
Port Number Set the port number of the QR server.
Connect Timeout(sec) Set the time limit for the network connection timeout.
Repeat Count Set the number of repeated atempts for connecting to the QR server.
Dimse Timeout(sec) Set the timeout time for sending the Dimse command.
Acse Timeout(sec) Set the timeout time for sending the Acse command.
Max. Result Set the maximum number of patient records that can be sent to the system.
Click Echo to verify the connection between the system and the server after you input the settings. A summary
displays if the connection is veried.
4.9 Dening System Defaults
You can dene your system defaults on the Loading Defaults Menu.
Peripheral
General
Comment
Measure
Bodymark
DICOM
Load Default
User Security
About
Save&Exit
Exit
System Setting
New
Export/ImportLoad
default
Report
Touch Screen
Figure 4-22 Loading Defaults Menu
To Next Page
Loading...
