Sonoscape S22 User Manual

4 Customizing Your System
Basic User Manual 33
Item Description
NetMask Set the netmask address of the system.
Default Gateway Set the gateway address of the system.
Speed/Duplex
Click
Advance
,
Speed
and
Duplex
textboxes are displayed on the menu.
You can adjust the settings of these items to change the speed and communication mode
of the local network.
Click
Set
to save the settings, and then you can click
Search
to view your settings.
DICOM AE Title Set the Application Entity (AE) title of the system.
Mac Address View the MAC address of the system.
Ping IP Addr.
Type an IP address and click
Ping
to test the connection.
■ Wireless Settings
Item Description
Wireless Network Enable or disable access to wireless network.
Name Displays the name of the wireless network.
State Displays the connection status of the wireless network.
Level Displays the signal strength of the wireless network.
Advance
Click
Advance
to view the information of your current network, and make settings of
your local network.
Connect the wireless network as follows:
1. Click
Refresh
to display all wireless networks on the menu.
2. Select the desired wireless network and click
Connect
.
3. Input the password in the pop-up dialogue box if needed and click
OK
.
■ Printer Settings
Item Description
Printer Driver The default option is the most recently installed printer driver.
Video Invert Color is inverted when printing the report.
Default Printer Set the type of the default printer.
Net Printer IP Set an IP address of the network printer.
Add Printer Click the button and follow the on-screen instructions to install a printer driver.
4.3 Dening Annotation Library
You can add, modify, delete or arrange the predened annotation on the Annotation Settings menu.

Sonoscape S22 Specifications

General

Brand	Sonoscape
Model	S22
Category	Medical Equipment
Language	English