(Screen 1)
Version Updater
[ENT] Start Update
[RET] Return to Top Menu
HELP : [ENT][RET]
Version Up (Version Update by disc)
Overview:
This is used to update the version using an update disc.
This menu is not available after 㰱IOP measurement is executed.
Screen 1: Screen after entering Version Updater menu
Operations:
[ENT] Start update by disc o (Tray opens, and Screen 2 is opened)
[RET] Return to Service Mode top menu
Screen 2: Insert the version update disc
Operations:
[ENT] Close tray and perform disc check
[RET] Cancel䇭(Tray closes, and screen returns to Screen 1)
Screen 3: During disc check o OK
Operations:
The set is rebooted automatically.
Screen 4: During check o NG
Operations:
[Error] ··· (Error message) is output, and the screen returns to
screen 2.
Display panel:
During disc loading V-INSCD
When loading of disc fails V-NODSC
When check fails V-CHKNG
When check is successful V-CHKOK
During reboot REBOOT
(Screen 2)
Version Updater
Insert update DISC ...
[ENT] Tray Close and Check start
[RET] Cancel
HELP: [ENT][RET]
(Screen 3)
Version Updater
Now, mounting and checking... OK
(Screen 4)
Version Updater
Now, mounting and checking...
[Error] Can’t use DISC!
HELP: [ENT][RET]
To Next Page
Loading...
