Sony CDX-M700R - Motor Block Assy, Cam (R) Assy; Main Board

24
1 PTT 2.6x6
4 PTT 2.6x6
5 motor block assy
2 cam (R) assy
3 CNP902
A
Note: Install the cam (R) assy with
the cam fully rotated in the
direction of the arrow A.
2-6. MAIN BOARD
2-5. MOTOR BLOCK ASSY, CAM (R) ASSY
Note : Install the motor block assy and cam (R) assy in this roder.
For phase alignment between cams (L) and (R), see page 29 and 31.
4 PTT 2.6x6
ground point
5 PTT 2.6x6
ground point
1 PTT 2.6x8
6 MAIN board
3 PTT 2.6x
8
2 PTT 2.6x8