The image does not appear on the TV screen.
• Check [Video Out] to scc if the video output signal of your camera is set to the color system of
your TV (page 54).
• Check whether the connection is correct (page 76).
• The s_ itch on the cable for multi-use temfinal is set to "CAMERA". Set to "TV" (page 76).
The image does not appear on the screen when a USB connection is made.
• The swilch on the cable for multi-use lermin d is set 1o 'TV. Disconnect Ihc cabh: l_)r n'mlli-
use lerminal or set the switch to "CAMERA" (plge 59).
Your camera cannot delete an image.
• Cancel the protection (page 39).
• You are using the 'Memory Stick Duo" with the write-protect switch, and the switch is set to
the LOCK position. Set the switch to the recording position (page 93).
You have deleted an image by mistake.
• Once you have deleted an image_ you cannot restore it. We recommend that you protect
images (page 38), or use the "Memory Stick Duo" with the write-protect switch and set the
switch to the LOCK position (page 93) to prevent accidental erasure.
The resizing function does not work.
•You cannot rcsize mo_ ies andMulti Burst images.
You cannot display a DPOF (Print order) mark.
• You cannot disphLvDPOF (Print order) marks on movies.
You cannot cut a movie.
• The movie is not long enough to cut (shorter than about tx_oseconds).
• Cancel the protection (page 39).
• Still images cannot be cut.
g
83
To Next Page
Loading...
