Sony DCR-HC39E - Page 92

6-10
DCR-HC39E/HC41/HC42/HC42E/HC43/HC43E
6. 1A Page table
Note 1: If reading/writing data on pages 1A, set data: 01 to page:
0, address: 10, and then select pages: A. By this data set-
ting, the pages 1A can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2: Fixed data-1: Initialized data. (Refer to “1. Initializing
the A, B, D, 1A, 1B Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of A, B, D, 1A, 1B Page Data”)
Address
Initial value
Remark
NTSC PAL
00 to FF Fixed data-1 (Initialized data)
7. 1B Page table
Note 1: If reading/writing data on pages 1B, set data: 01 to page:
0, address: 10, and then select pages: B. By this data set-
ting, the pages 1B can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2: Fixed data-1: Initialized data. (Refer to “1. Initializing
the A, B, D, 1A, 1B Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of A, B, D, 1A, 1B Page Data”)
Address
Initial value
Remark
NTSC PAL
00 to FF Fixed data-1 (Initialized data)
5. D Page table
Note 1: Check that the data of page: 0, address: 10 is “00”.
Note 2: Fixed data-1: Initialized data. (Refer to “1. Initializing
the A, B, D, 1A, 1B Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of A, B, D, 1A, 1B Page Data”)
Address
Initial value
Remark
NTSC PAL
10 to 13 Fixed data-1 (Initialized data)
14 Fixed data-2
15 Fixed data-1 (Initialized data)
16
17
Fixed data-2
18 to 27 Fixed data-1 (Initialized data)
28
29
2A Fixed data-2
2B
2C
2D Fixed data-1 (Initialized data)
2E
2F Fixed data-2
30
31, 32 Fixed data-1 (Initialized data)
33 Fixed data-2
34 to 44 Fixed data-1 (Initialized data)
45 Fixed data-2
46, 47 Fixed data-1 (Initialized data)
48 Fixed data-2
49 Fixed data-1 (Initialized data)
4A
4B
Fixed data-2
4C Fixed data-1 (Initialized data)
4D Fixed data-2
4E to 56 Fixed data-1 (Initialized data)
57 Fixed data-2
58 to 70 Fixed data-1 (Initialized data)