70
When you use your camcorder abroad, you
can adjust the clock to the local time by
setting the time difference with the
SEL/
PUSH EXEC
dial.
When you set the time difference to 0, the
clock returns to the original setting.
You can select the language to be used on
the LCD screen.
z Tips
• Your camcorder offers [ENG[SIMP]]
(simplified English) in case that you cannot find
your native tongue among the options.
When you set this function to [ON], you
can enlarge movie images about 1.1 to 5
times (still images about 1.5 to 5 times)
with the handle zoom lever. The default
setting is [OFF]. To end the zoom, press
and hold the W side of the handle zoom
lever until it stops.
z Tips
• To move the zoom horizontally, press the SEL/
PUSH EXEC dial, then turn the dial. To move
the zoom vertically, press the SEL/PUSH EXEC
dial one more time, then turn the dial.
B ON
Activates a melody when you start/stop
recording.
OFF
Cancels the melody.
When you set this function to [OFF], you
can turn off the camera recording lamps
during recording. The default setting is
[ON].
When you set this function to [ON], you
can use the supplied Remote Commander
(p. 105). The default setting is [ON].
z Tips
• Set to [OFF] to prevent your camcorder from
responding to a command sent by another VCR
remote control unit.
WORLD TIME
LANGUAGE
PB ZOOM (Playback zoom)
BEEP
REC LAMP (Recording lamp)
REMOTE CTRL (Remote control)
Press the MENU button t select the (OTHERS) with the SEL/PUSH EXEC dial.
To Next Page
Loading...
