EasyManua.ls Logo

Sony DCR-VX2200E - Warning Indicators and Messages

Sony DCR-VX2200E
112 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
85
Troubleshooting
Warning indicators and messages
When an error occurs, a warning indicator
appears on the LCD screen or in the
viewfinder.
Some symptoms you can fix by yourself. If
the problem persists even after you have
tried a couple of times, contact your Sony
dealer or local authorized Sony service
facility.
C: (or E:) ss:ss (Self-diagnosis
display)
C:04:ss
The battery pack is not an
“InfoLITHIUM” battery pack. Use an
“InfoLITHIUM” battery pack (
p. 91).
Connect the DC plug of the AC
Adaptor to the DC IN jack of your
camcorder securely (
p. 12).
C:06:ss
The battery pack is too hot. Replace the
battery pack, or remove it and put it in a
cool place.
C:21:ss
Moisture condensation has occurred.
Remove the cassette and leave your
camcorder for at least 1 hour, then re-
insert the cassette (
p. 94).
C:22:ss
Clean the head using a cleaning
cassette (optional) (
p. 95).
C:31:ss / C:32:ss
Symptoms that are not described above
have occurred. Remove and insert the
cassette, then operate your camcorder
again. Do not perform this procedure if
moisture condensation has occurred
(
p. 94).
Remove the power source. Reconnect it
and operate your camcorder again.
Change the cassette. Press the RESET
button (
p. 102), and operate your
camcorder again.
E:61:ss / E:62:ss
Contact your Sony dealer or local
authorized Sony service facility. Inform
them of the 5-digit code, which starts
from “E.”
E (Battery level warning)
The battery pack is nearly used up.
Depending on the operating,
environment, or battery conditions, E
may flash, even if there are
approximately 5 to 10 minutes
remaining.
% (Moisture condensation warning)
Eject the cassette, remove the power
source, and then leave it for about 1
hour with the cassette lid open (
p. 94).
(Warning indicator pertaining to
“Memory Stick Duo” media)
A “Memory Stick Duo” media is not
inserted (
p. 19).
(Warning indicators pertaining to
“Memory Stick Duo” media
formatting)
The “Memory Stick Duo” media is
damaged.
The “Memory Stick Duo” media is not
formatted correctly (
p. 68, 90).
(Warning indicators pertaining to
unsupported “Memory Stick Duo”
media)
A “Memory Stick Duo” media that
cannot be used in your camcorder is
inserted (
p. 90).
Self-diagnosis display/Warning
indicators
Continued ,

Table of Contents

Other manuals for Sony DCR-VX2200E

Related product manuals