91
Additional Information
Stick Duo” media adaptor in the wrong
direction, it may be damaged.
• Do not insert a “Memory Stick Duo” media
adaptor without a “Memory Stick Duo” media
attached. Doing so may result in malfunctions of
the unit.
x On a “Memory Stick PRO Duo” media
• The maximum memory capacity of a “Memory
Stick PRO Duo” media that can be used on your
camcorder is 32 GB.
Notes on using “Memory Stick Micro”
media
• To use a “Memory Stick Micro” media with the
camcorder, you need a Duo-sized M2 Adaptor.
Insert the “Memory Stick Micro” media into the
Duo-sized M2 Adaptor, then insert the adaptor
into the “Memory Stick Duo” media slot. If you
insert a “Memory Stick Micro” media into the
camcorder without using a Duo-sized M2
Adaptor, you might not be able to remove it
from the camcorder.
• Do not leave the “Memory Stick Micro” media
within the reach of small children. They might
accidentally swallow it.
On image data compatibility
• Image data files recorded on a “Memory Stick
Duo” media by your camcorder conform to the
“Design rule for Camera File system” universal
standard established by the JEITA (Japan
Electronics and Information Technology
Industries Association).
• On your camcorder, you cannot play back still
images recorded on other devices (DCR-
TRV900E or DSC-D700/D770) that do not
conform to the universal standard. (These
models are not sold in some regions.)
• If you cannot use a “Memory Stick Duo” media
that has been used with another device, format it
with your camcorder (
p. 68). Note that
formatting erases all information on the
“Memory Stick Duo” media.
• You may not be able to play back images with
your camcorder:
– When playing back image data modified on
your computer.
– When playing back image data recorded with
other devices.
This unit is compatible with an
“InfoLITHIUM” battery pack (L series).
Your camcorder operates only with an
“InfoLITHIUM” battery pack.
“InfoLITHIUM” L series battery packs
have the
mark.
What is an “InfoLITHIUM” battery
pack?
An “InfoLITHIUM” battery pack is a
lithium-ion battery pack that has functions
for communicating information related to
operating conditions between your
camcorder and an AC Adaptor/ Charger.
The “InfoLITHIUM” battery pack
calculates the power consumption
according to the operating conditions of
your camcorder, and displays the remaining
battery time in minutes.
With an AC Adaptor/Charger, the
remaining battery time and charging time
appear.
To charge the battery pack
• Be sure to charge the battery pack before you
start using your camcorder.
• We recommend charging the battery pack in an
ambient temperature of between 10 °C to 30 °C
(50 °F to 86 °F) until the CHG lamp turns off. If
you charge the battery pack outside of this
temperature range, you may not be able to
charge it efficiently.
• After charging is complete, disconnect the cable
from the DC IN jack on your camcorder or
remove the battery pack.
To use the battery pack effectively
• Battery pack performance decreases when the
surrounding temperature is 10 °C (50 °F) or
below, and the length of time you can use the
battery pack becomes shorter. In that case, do
one of the following to use the battery pack for a
longer time.
About the “InfoLITHIUM” battery
pack
Continued ,
To Next Page
Loading...
