DHC-AZ55D/AZ33D.GB.3-215-548-11(1)
24
GB
When connecting a video deck
Connect the video deck to the TV using
a video cord (not supplied). However, do
not connect this unit to the TV through
the video deck. Otherwise, you may
experience video leakage when watching
video images from this system. Connect
this unit directly to the TV as shown
below.
TV
UnitVideo deck
Do not connect
directly
Tip
For higher quality video images:
Use the optional component video cords to
connect the COMPONENT VIDEO input
jacks on your TV to the COMPONENT
VIDEO OUT jacks of this unit. If your
TV is compatible with progressive format
le signals, use this connection and press
PROGRESSIVE
on the unit repeatedly
until “P AUTO” or “P VIDEO” appears in
the display (page 25).
You can use an optional S Video cord to
connect the S VIDEO input jack on your TV
to the S VIDEO OUT jack of this unit.
Changing the color system
(Except for European and Russian
models)
Set the color system to PAL or NTSC
depending on the color system of your
TV.
e default setting for color system is
dierent depending on the area.
Each time you perform the procedure
below, the color system changes as
follows:
NTSC
PAL
1
Press /
to turn o the system.
2
Press DISPLAY
repeatedly until
“SONY DEMO” appears in the display.
3
Press /
on the unit while
touching
on the unit.
e system turns on automatically and
the color system is changed.
“COLOR NTSC” or “COLOR PAL”
appears in the display.
To Next Page
Loading...
Need help?
General
