Sony DHC-AZ33D User Manual

DHC-AZ55D/AZ33D.GB.3-215-548-11(1)
25
GB
Getting Started
Continued

Changing the format of the
video signal output from
COMPONENT VIDEO OUT jacks
Progressive is a method for displaying
TV images that reduces ickering and
sharpens the image. To use this method,
you need to connect to a TV that can
accept progressive signals.
You can output video signals from
COMPONENT VIDEO OUT jacks in
Interlace or Progressive format.
1 Press FUNCTION +/

repeatedly to select “DVD” (or
touch DVD

on the unit).
2 Press PROGRESSIVE

on the
unit repeatedly.
Select “P AUTO” or “P VIDEO” if
your TV accepts progressive signals
and the TV is connected to the
COMPONENT VIDEO OUT jacks.
Otherwise, select “INTERLACE.”
P AUTO (PROGRESSIVE AUTO):
e system automatically detects
the soware type and selects the
appropriate conversion method.
P VIDEO (PROGRESSIVE VIDEO):
e system xes the conversion
method to Progressive Video for
video-based soware.
Select this if the image is not clear
when you select “P AUTO.”
About DVD VIDEO software types and
the conversion method
e DVD VIDEO soware can be
divided into 2 types:
 Film-based soware
Film-based soware is derived from
lm and displays the images at 24
frames per second.
 Video-based soware
Video-based soware is derived from
TV, such as dramas and sitcoms and
displays images at 30 frames or 60
elds per second.
Some DVD VIDEO contains both types
of soware. In order for these images to
appear in your TV naturally when the
video output is in progressive format, the
progressive signals need to be converted
to match your DVD VIDEO soware.
Note
ere would be no image on your TV or the
image is not clear if your setting does not
match your TV or connection.

Sony DHC-AZ33D Specifications

General

Brand	Sony
Model	DHC-AZ33D
Category	Stereo System
Language	English