Sony DHC-AZ33D - Recording Onto a Tape; Sound Mixing

DHC-AZ55D/AZ33D.GB.3-215-548-11(1)
74
GB
Recording onto a tape
ere are three ways to record on a TYPE
I (normal) tape. Use the buttons on the
unit for the operation.
CD Synchro Recording
You can record an entire VIDEO CD or
AUDIO CD onto a tape. e recording
level is adjusted automatically.
Manual Recording
You can record just the portion you
want from a sound source, including
connected audio components.
Sound Mixing
You can “mix” sound from any one of the
sound sources and singing or speaking
into a microphone (not supplied). e
mixed sound can be recorded onto a tape.
1 Load a recordable tape into the
tape deck, then touch TAPE

to select “TAPE.”
2 Press DIRECTION

repeatedly
to select ““ to record on one
side. Select ““ or ““ to
record on both sides.
3 Touch 

repeatedly
to select recording side, then
touch 

.
If you select both sides recording or
front side recording, touch 

repeatedly to light up the 
indicator, then touch 

. If you
record on the reverse side, touch


repeatedly to light up the
 indicator, then touch 

.
4 Prepare the recording source.
For CD Synchro Recording:
Touch DVD

and insert the disc
you want to record. When the system
automatically starts playback, touch


twice to cancel resume play.
For Manual Recording and Sound
Mixing:
Select the desired source to record
or mix.
To record only sound from a
microphone, touch DVD

, and do
not start playing any other source in
step 6.