70
GB
Symptom
The “Borders”
“Yes/No”
setting does not
take effect.
Symptom
The picture is
too bright, dark,
reddish,
yellowish, or
greenish.
The eyes of the
subject are red.
Red-eye
reduction does
not take effect.
Check
• Did you enlarge, reduce
the size of, rotate, or move
an image after the red-eye
reduction?
Cause/Solutions
c Adjust an image by selecting Menu -
Edit - Adjust. (.page 28)
c Adjust for the red-eye phenomenon by
selecting Menu - Edit - Red-eye
reduction. (.page 29)
c Set the size of the adjustment frame to
be two to seven times as large as the
eye. (.page 29)
c Red-eye reduction may not work
properly if other editorial operations
such as enlarging, reducing the size of,
rotating, or moving an image.
Perform these editorial operations first
and then perform red-eye reduction.
Settings
Check
• Are you operating the
Creative Print menu?
Cause/Solutions
c In the Creative Print menu, templates
are used and you cannot select
border/borderless prints.
To Next Page
Loading...
