Sony DSC-R1 User Manual

18
Attaching the shoulder strap
Attaching the lens hood
When you shoot in bright lighting
conditions, such as outdoors, we
recommend that you use the lens hood to
reduce the image quality deterioration
caused by unnecessary light.
Position the lens hood as shown below, by
aligning the mark on the lens hood and
the mark on the lens, and attach the hood
to the lens (1). Turn the lens hood
clockwise until it clicks to align with the z
mark (2).
• You can attach the lens cap with the lens hood
attached.
• When the lens hood is attached, it may block
flashlight or AF illuminator light.
Storing the lens hood
The lens hood can be attached in the reverse
direction to store it with the camera when it
is not in use.
Position the lens hood as shown below, by
aligning the mark on the lens hood and
the mark on the lens, and attach the hood
to the lens (1). Turn the lens hood
clockwise until it clicks to align with the z
mark (2).
Attaching a conversion lens (not
supplied)
When you want to do enhanced wide-angle
shots or zoom-in shots on distant objects,
attach a conversion lens.
1 Attach the lens adaptor (not supplied).
2 Attach a conversion lens.
• For details, see the operating instructions
supplied with your conversion lens.
2
1
2
1

Sony DSC-R1 Specifications

General

Sensor Type	CMOS
Sensor Size	21.5 x 14.4 mm
Effective Pixels	10.3 Megapixels
Lens	Carl Zeiss Vario-Sonnar T*
Focal Length	24-120 mm (35mm equivalent)
ISO Sensitivity	160-3200
Shutter Speed	30 - 1/2000 sec
Image Formats	JPEG, RAW
Battery	NP-FM50 InfoLithium rechargeable battery
Weight	995 g (including battery)
Aperture Range	f/2.8-4.8
LCD Screen	2.0-inch, 134, 000 pixels
Viewfinder	Electronic (EVF), 235, 000 pixels
Storage Media	CompactFlash, Memory Stick
Dimensions	139 x 97 x 156 mm
Camera Type	Digital SLR-like camera