63
Using the menu
For details on the operation
t
page 31
Adjusts the amount of flash light.
• The flash level can be set in 1/3 EV increments.
• The value is not displayed on the screen. It is indicated as + or –.
• To change flash mode t page 50
• If the subject is too bright or dark, this adjustment may have no effect.
• When the flash mode is set to (No flash), you cannot adjust the flash level.
Allows you to shoot an image with special effects.
• This setting is not maintained when the power is turned off.
Selects the color reproduction mode.
Adjusts the saturation of the image.
(Flash Level)
P S A M
M +2.0EV
Toward +: Makes the flash level higher.
0EV
The amount of flash light that the camera adjusts
automatically.
m –2.0EV
Toward –: Makes the flash level lower.
PFX (P.Effect)
P S A M
B & W ( )
Records the image in monochrome (black and white).
Sepia ( )
Records the image in sepia (like an old photograph).
Off
No effect.
COLOR (Color)
P S A M
Adobe RGB (Adobe RGB)
For details, see page 57.
Vivid (VIVID)
Standard
(Saturation)
P S A M
+ ( )
Toward +: Brightens the color.
Normal
– ( )
Toward –: Darkens the color.
To Next Page
Loading...
