Sony DXC-9100P - Connection to Enable Remote Control; Connecting to the RM-C950 Remote Control Unit

47
Connection to Enable Remote Control
Connecting to the RM-C950 Remote Control Unit
Note
When the RM-C950 remote control unit is used with the
DXC-9100P, the functions availables on the PRINT,
FLASH and LONG EXPOSURE buttons on the RM-C950
change.
For details, see “The PRINT, FLASH and LONG EXPOSURE
buttons on the RM-C950” on the next page.
Video monitor,
VCR, etc.
Composite video input
VIDEO OUT
VIDEO OUT
EXT CTRL
DC IN/
REMOTE
CCU
LENS
MENU FUNCTION DATA
UP
WHITE
BARS
RGB/SYNC
VBS
SCAN
DOWN
FREEZE
SOURCE
1
2
DC IN/
VBS
REMOTE
CCDC-5/10/25/50A/100 cable or
CCMC-12P02/05/10/25 cable
CMA-D2CE/D2MDCE
camera adaptor
CCDC cable:CAMERA (4-pin)
CCMC cable:CAMERA (12-pin)
Set the MODE
selector to the “1”
position.
AC IN
Power cord
RM-C950 remote control unit
CAMERA
75Ω coaxial cable
Camera cable
(supplied with RM-C950)