57
Operating Precautions
Operating or storage location
Avoid operating or storing the camera in the following
locations:
• Extremely hot or cold places (Operation temperature: -5°C
to +45°C [23°F to 113°F])
• In direct sunlight for long periods, or close to heating
equipment (e.g., near heaters)
• Close to sources of strong magnetism
• Close to sources of powerful electromagnetism
• Close to sources of powerful electromagnetic radiation,
such as radios or TV transmitters
Ventilation
To prevent internal heat buildup, do not block air circulation
around the camera.
Connections
Do not connect the CCU connector and the DC IN/
VBS connector simultaneously. If they are connected
simultaneously, the unit may be damaged.
Transportation
When transporting the camera, repack it as originally packed
at the factory or in materials equal in quality.
Cleaning
• Use a blower to remove dust from the lens or optical filter.
• Use a soft, dry cloth to clean the external surfaces of the
camera. If it is very dirty, use a soft cloth dampened with a
small quantity of neutral detergent, then wipe dry.
• Do not use volatile solvents such as alcohol, benzene or
thinners as they may damage the surface finishes.
To Next Page
Loading...
