This product reboots each time you change the setting.
When you change the setting, formatting the recording media is required.
When you select [24p Mode], the following settings will be limited.
The movie recording format is limited to 24p, so you can select from the XAVC S 4K, XAVC S HD
and AVCHD formats.
Depending on the connected TV, images may not be played back normally because the video
signal output from this product is in the NTSC format.
You cannot set [
Frame Rate].
[188] How to Use Menu operations Setup
Cancel 24p Mode (1080 50i-compatible device)
Return the system to 50i mode by canceling 24p mode.
1. - [Setup] - [ General Settings] - [Cancel 24p Mode] - .
[189] How to Use Menu operations Setup
Battery Info
You can check the estimated remaining capacity of the battery pack.
1. - [Setup] - [ General Settings] - [Battery Info].
[190] How to Use Menu operations Setup
Power Save
You can change the settings for the backlight of the LCD monitor and the power status of
this product.
1. - [Setup] - [ General Settings] - [Power Save].
To Next Page
Loading...
