[Spot Meter/Fcs]
[Spot Meter]
[Spot Focus]
[Exposure]
[Focus]
[IRIS]
[Shutter Speed]
[AGC Limit]
[AE Shift]
[White Balance Shift]
[Low Lux]
[Scene Selection]
[Picture Effect]
[
Cinematone]
[
SteadyShot]
[Auto Back Light]
[Face Detection]
[231] Troubleshooting Troubleshooting Batteries/power sources
The power abruptly turns off.
Use the AC Adaptor.
In the default setting, this product turns itself off when no operations are performed for
more than about 2 minutes ([Power Save]). Change the setting of [Power Save], or turn
on the power again.
Charge the battery pack.
[232] Troubleshooting Troubleshooting Batteries/power sources
The POWER/CHG (charge) lamp does not light while the
battery pack is being charged.
Turn off this product.
Attach the charged battery pack to this product correctly.
Connect the power cord (mains lead) to a wall outlet (wall socket) properly.
The battery charge is completed.
To Next Page
