You can connect an external microphone (not supplied) to the MIC jack. This jack also
accepts a "plug-in-power" microphone.
Attach the microphone to the accessory shoe of the camcorder.
If the microphone has two plugs, connect the DC IN plug to the RFU DC OUT jack on the
camcorder.
Accessory shoe
--MIC jack
RFU DC OUT jack
Note When recording with an external microphone, wind noise is not muted.
When you connect a wrred remote control unit or editing controller (not supphed) to the l,t
REMOTE control connector, you can operate your camcorder from a distance.
REMOTE control
connector
About @ (LANC)
U standsfor LocalApplicationControl Bus System. The @ connector is used for
controllingthe tape transportof video equipment and peripheralsconnected to it.This
connectorhas the same function as the connectorsindicatedas CONTROL Lor
REMOTE.
Advanced Camera Operation 29
To Next Page
Loading...
