Sony HAP-S1 User Manual

Resetting the product (performing the Factory Reset function)
Displaying an alert message to notify the user of an operational error
Setting the Network Standby function (Network Standby)
When you set the Network Standby function to [On], you can start up or operate the HDD
AUDIO PLAYER via the network even when the HDD AUDIO PLAYER is in standby mode.
1. Select [Settings] - [System Settings] in the Home screen.
2. Select [Network Standby].
3. Select [On].
Descriptions of menu settings
Selectable menu items are described below.
On:
The HDD AUDIO PLAYER is connected to the network at all times, even when the unit is
turned off. This allows you to start up or operate the HDD AUDIO PLAYER from the HAP Music
Transfer or HDD Audio Remote application. This mode also reduces the startup time of the
HDD AUDIO PLAYER.
Off:
The power consumption is lower than when the Network Standby function is set to [On], but the
startup time when the HDD AUDIO PLAYER is turned on is longer (factory default setting).
Setting the Auto Standby function (Auto Standby)
If you set the Auto Standby function to [On], if you do not operate the HDD AUDIO PLAYER
and do not play tracks for approximately 20 minutes, the unit is automatically turned off and
enters standby mode to reduce the power consumption.
1. Select [Settings] - [System Settings].
2. Select [Auto Standby].
3. Select [On] (factory default setting).

Sony HAP-S1 Specifications

General

Product color	Silver
Audio formats supported	AAC, AIFF, ALAC, FLAC, LPCM, MP3, WAV, WMA
Impedance	16 Ω
Frequency range	10 - 100000 Hz
Audio output channels	2.0 channels
Signal-to-Noise Ratio (SNR)	100 dB
Channels quantity	2 channels
Wi-Fi	Yes
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Automatic synchronization	You don't have to change personal settings when first connecting your device. Your device is automatically synchronized with the settings of your car, so once you have done it for the car, that's it!
Storage media type	HDD
Total storage capacity	500 GB
HDCP	No
Headphone outputs	1
USB 2.0 ports quantity	2
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	0
AC input voltage	230 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.3 W
Display diagonal	4.3 \

Weight and Dimensions

Width	- mm
Weight	- g