Sony HAP-S1 User Manual

The favorite status ( or ) is displayed on the right of each track.
When you start playing by selecting [Folders] from the Home screen, the file names are
displayed instead of the track names on the Play Queue screen.
Hint
You can turn the jog dial to select a track and push it in to play the selected track.
To return to the playback screen, press the BACK button.
If you do not operate the HDD AUDIO PLAYER for about 15 seconds, the Play Queue
screen closes and returns to the playback screen automatically.
[65] Settings menus
Network Settings
Connecting to a network (Internet Settings)
Viewing the network status (View Network Status)
Changing the device name of the HDD AUDIO PLAYER that is displayed on a network (Device
Name)
[66] Settings menus
HDD Settings
Viewing the hard disk drive status (View HDD Status)
Rescanning a hard disk drive (Rescan HDD)

Sony HAP-S1 Specifications

General

Product color	Silver
Audio formats supported	AAC, AIFF, ALAC, FLAC, LPCM, MP3, WAV, WMA
Impedance	16 Ω
Frequency range	10 - 100000 Hz
Audio output channels	2.0 channels
Signal-to-Noise Ratio (SNR)	100 dB
Channels quantity	2 channels
Wi-Fi	Yes
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Automatic synchronization	You don't have to change personal settings when first connecting your device. Your device is automatically synchronized with the settings of your car, so once you have done it for the car, that's it!
Storage media type	HDD
Total storage capacity	500 GB
HDCP	No
Headphone outputs	1
USB 2.0 ports quantity	2
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	0
AC input voltage	230 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.3 W
Display diagonal	4.3 \

Weight and Dimensions

Width	- mm
Weight	- g