Sony HAP-S1 User Manual

ATRAC (ATRAC3, ATRAC3plus, ATRAC Advanced Lossless)
Extensions: .oma, .aa3
Bit rate: 48 kbps - 352 kbps (ATRAC3plus)
Bit rate: 132 kbps (ATRAC3)
Sampling frequency: 44.1 kHz
Quantization bits: 16 bits
Note
No copy protected files in any of the above formats can be played. If you transfer copy
protected files to the HDD AUDIO PLAYER, music information of the copy protected files will
appear in gray and you will not be able to select it.
Only 2ch files in the above formats are supported.
Playing formats other than those above may produce noise or even damage the speakers if
played at a high volume.
[3] About the HDD AUDIO PLAYER SYSTEM
How to make and enter selections
The basic operations of the HDD AUDIO PLAYER are as follows:
1. Turn the jog dial left or right to select an item.
2. Push the jog dial in to enter the selection.
Hint
To display the Home screen, press the HOME button.
To go back to the previous screen, press the BACK button.
[4] About the HDD AUDIO PLAYER SYSTEM
How to input characters

Sony HAP-S1 Specifications

General

Product color	Silver
Audio formats supported	AAC, AIFF, ALAC, FLAC, LPCM, MP3, WAV, WMA
Impedance	16 Ω
Frequency range	10 - 100000 Hz
Audio output channels	2.0 channels
Signal-to-Noise Ratio (SNR)	100 dB
Channels quantity	2 channels
Wi-Fi	Yes
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Automatic synchronization	You don't have to change personal settings when first connecting your device. Your device is automatically synchronized with the settings of your car, so once you have done it for the car, that's it!
Storage media type	HDD
Total storage capacity	500 GB
HDCP	No
Headphone outputs	1
USB 2.0 ports quantity	2
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	0
AC input voltage	230 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.3 W
Display diagonal	4.3 \

Weight and Dimensions

Width	- mm
Weight	- g