Sony HAP-S1 User Manual

When connecting through LINE IN jacks
: LINE IN jacks of the HDD AUDIO PLAYER
: Audio cord (not supplied)
: Analog output jacks of other equipment
[23] Connections
Connecting an external hard disk drive
You can connect an external hard disk drive (USB storage) to the EXT port on the rear panel of
the HDD AUDIO PLAYER. The music files transferred from your computer to the external hard
disk drive can be played in the same way as music files stored in the internal hard disk drive of
the HDD AUDIO PLAYER.
Note
Compatible with USB 2.0.
Be sure to connect or disconnect the external hard disk drive (USB storage) only when the
HDD AUDIO PLAYER is in the standby mode.
The HDD AUDIO PLAYER registers content stored in the external hard disk drive to the
database in the HDD AUDIO PLAYER. If there is insufficient database capacity, you cannot
transfer any more music file or scan the content of a newly connected external hard disk
drive. In this case, delete unnecessary music files and perform the Rescan HDD function. If
this does not solve the problem, perform the Factory Reset function or the Clear Database
function, connect an external hard disk drive, and then rescan the external hard disk drive.
Only the external hard disk drive that is currently connected can be used at the same time as
the internal hard disk drive.
The HDD AUDIO PLAYER is compatible with the ext4 and FAT file systems. External hard
disk drives with other file systems need to be formatted by selecting the formatting function
from the menu of the HDD AUDIO PLAYER. Please note that the content of the external
hard disk drive is deleted when formatting.
You cannot use an external hard disk drive (USB storage) formatted by the HDD AUDIO
PLAYER with other devices such as a computer, because the external hard disk drive is
formatted only for the HDD AUDIO PLAYER. To use the external hard disk drive with other
devices format it using the device you want to use it with. Please note that any music files on
the external hard disk drive are deleted when the hard disk drive is deleted.
If an external hard disk drive is connected during playback, the playback stops.
USB hubs cannot be used.
Connect an external hard disk drive to the EXT port on the rear panel of the HDD AUDIO
PLAYER as shown below.

Sony HAP-S1 Specifications

General

Product color	Silver
Audio formats supported	AAC, AIFF, ALAC, FLAC, LPCM, MP3, WAV, WMA
Impedance	16 Ω
Frequency range	10 - 100000 Hz
Audio output channels	2.0 channels
Signal-to-Noise Ratio (SNR)	100 dB
Channels quantity	2 channels
Wi-Fi	Yes
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Automatic synchronization	You don't have to change personal settings when first connecting your device. Your device is automatically synchronized with the settings of your car, so once you have done it for the car, that's it!
Storage media type	HDD
Total storage capacity	500 GB
HDCP	No
Headphone outputs	1
USB 2.0 ports quantity	2
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	0
AC input voltage	230 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.3 W
Display diagonal	4.3 \

Weight and Dimensions

Width	- mm
Weight	- g