A software update is started.
Formatting of the hard disk drive is started.
Rescanning of the hard disk drive is started.
The HDD AUDIO PLAYER is manually turned off.
The product is reset. (The factory reset function is performed.)
The Sleep timer is set to off.
Hint
When the remaining time until the sleep timer activates is less than 60 seconds, the
remaining time is shown on the screen.
You can set the Sleep timer from the Playback Options menu while playing a track.
Receiving notifications about software updates (Software
Update Notification)
If you set the Software Update Notification function to [On], a notification appears on the Home
screen when a new version of the software is available.
1. Select [Settings] - [System Settings] in the Home screen.
2. Select [Software Update Notification].
3. Select [On] (factory default setting).
Displaying the current system information (System
Information)
You can confirm the current system information of the HDD AUDIO PLAYER including the
software version, the network device name, the MAC address of the wired and wireless LAN,
the device ID, the network connection status, your current IP address and the amount of free
space on the internal and external hard disk drives.
1. Select [Settings] - [System Settings] in the Home screen.
2. Select [System Information].
To Next Page
Loading...
Need help?
General
Weight and Dimensions
