EasyManuals Logo

Sony HAP-S1 User Manual

Sony HAP-S1
127 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #39 background imageLoading...
Page #39 background image
ATRAC (ATRAC3, ATRAC3plus, ATRAC Advanced Lossless)
Extensions: .oma, .aa3
Bit rate: 48 kbps - 352 kbps (ATRAC3plus)
Bit rate: 132 kbps (ATRAC3)
Sampling frequency: 44.1 kHz
Quantization bits: 16 bits
Note
No copy protected files in any of the above formats can be played. If you transfer copy
protected files to the HDD AUDIO PLAYER, music information of the copy protected files will
appear in gray and you will not be able to select it.
Only 2ch files in the above formats are supported.
Playing formats other than those above may produce noise or even damage the speakers if
played at a high volume.
[36] Playing music
Transferring music files from a computer to the HDD
AUDIO PLAYER
To play music files on the HDD AUDIO PLAYER, you first need to transfer music files from your
computer to the HDD AUDIO PLAYER.
Install the HAP Music Transfer application on your computer and then transfer music files using
the application.
Download site of HAP Music Transfer:
Install HAP Music Transfer on your computer.
Models for the USA and Canada:
http://esupport.sony.com/swu/8812
Models for Europe:
www.sony.eu/support
Models for China:
http://www.sony-asia.com/support
For details on operations of HAP Music Transfer, refer to the HAP Music Transfer Help.
Note
Do not transfer music files from two or more HAP Music Transfer applications (computers) at
the same time.

Other manuals for Sony HAP-S1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sony HAP-S1 and is the answer not in the manual?

Sony HAP-S1 Specifications

General IconGeneral
Product colorSilver
Audio formats supportedAAC, AIFF, ALAC, FLAC, LPCM, MP3, WAV, WMA
Impedance16 Ω
Frequency range10 - 100000 Hz
Audio output channels2.0 channels
Signal-to-Noise Ratio (SNR)100 dB
Channels quantity2 channels
Wi-FiYes
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
Ethernet LAN data rates10, 100, 1000 Mbit/s
Automatic synchronizationYou don't have to change personal settings when first connecting your device. Your device is automatically synchronized with the settings of your car, so once you have done it for the car, that's it!
Storage media typeHDD
Total storage capacity500 GB
HDCPNo
Headphone outputs1
USB 2.0 ports quantity2
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity0
AC input voltage230 V
AC input frequency50 - 60 Hz
Power consumption (standby)0.3 W
Display diagonal4.3 \
Weight and Dimensions IconWeight and Dimensions
Width- mm
Weight- g

Related product manuals