The Wi-Fi (wireless LAN) function of the HDD AUDIO PLAYER turns off when you select the
wired LAN setting.
1. Select [Settings] - [Network Settings] in the Home screen.
2. Select [Internet Settings].
3. Select the desired method of connection.
In the case of [Wired Setup]:
There are two connection methods: automatic connection and manual connection.
In the case of [Wireless Setup]:
There are four connection methods: using the WPS push button configuration, selecting
an access point, adding a new access point and using the (WPS) PIN code
configuration.
Refer to each related topic for details of each connection method.
4. Follow the instructions on the screen to connect to the network.
Viewing the network status (View Network Status)
You can view the current network status of the HDD AUDIO PLAYER.
You can confirm various settings of the current network such as the connection method,
wired/wireless connection status, internet access, network service set identifier (SSID), IP
address settings, DNS settings and MAC address.
1. Select [Settings] - [Network Settings] in the Home screen.
2. Select [View Network Status].
A screen indicating various network status items appears. When you have confirmed the
network status, select [Close] to close the screen.
Changing the device name of the HDD AUDIO PLAYER
that is displayed on a network (Device Name)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
