You can edit the device name of the HDD AUDIO PLAYER that is displayed on a network.
1. Select [Settings] - [Network Settings] in the Home screen.
2. Select [Device Name].
The current network device name is displayed.
3. When the input space for the network device name is surrounded by a white box, push the
jog dial in.
An editing display and keyboard appear.
4. Edit the network device name.
You can enter a maximum of 15 alphanumeric characters and/or symbols for a network
device name.
For details on how to use the keyboard, see “How to input characters.”
When the editing is done, the screen returns to the step 3.
5. When the desired network device name is displayed, select [OK].
The edited network device name is registered.
Hint
If you select [Cancel] or press the BACK button in step 5, the edited network device name is
not registered.
Viewing the hard disk drive status (View HDD Status)
You can confirm the total capacity, used space and free space of the internal and external hard
disk drives.
1. Select [Settings] - [HDD Settings] in the Home screen.
2. Select [View HDD Status].
A screen indicating the status of the internal and external hard disk drives appears. When
you have confirmed the hard disk drive status, select [Close] to close the screen.
Descriptions of display items
Information about the internal and external hard disk drives is displayed.
Internal HDD (HAP_Internal) /External HDD (HAP_External) :
The type of internal or external hard disk drive is displayed on the volume label. The label of the
To Next Page
Loading...
Need help?
General
Weight and Dimensions
