Sony HCD-SHAKE33 - Reset Procedures

HCD-SHAKE33/SHAKE77
18
[USER RESET]
The user reset clears all data including preset data stored in the data
fl ash to initial conditions exclude history mode data.
Procedure:
1. Press [ \/1 ] button to turn on the system.
2. Press [
 ] button and [LED COLOR] button simultaneously
for 3 seconds.
3. “RESET” appears on the
fl uorescent indicator tube. After that,
the
fl uorescent indicator tube becomes blank for a while, and
the system is reset.
[COLD RESET]
The cold reset clears all data including preset data stored in the
data
fl ash to initial conditions included history mode data. Execute
this mode when returning the set to the customer.
Procedure:
1. Press [ \/1 ] button to turn on the system.
2. Press [
 ] button and [OPTIONS] button simultaneously for 3
seconds.
3. “COLD RESET” appears on the
fl uorescent indicator tube.
After that, the
fl uorescent indicator tube becomes blank for a
while, and the system is reset.
[CD TRAY LOCK MODE]
This mode let you lock the disc tray. When this mode is activated,
the disc tray will not open when [
Z OPEN/CLOSE] button is
pressed. The message “LOCKED” will be displayed on the
fl uorescent indicator tube. This mode only applied when there is
disc(s) on the tray.
Procedure:
1. Press [ \/1 ] button to turn on the system.
2. Select CD function.
3. Press [
 ] button and [ n /  +] button simultaneously and hold
down until “LOCKED” or “UNLOCKED” displayed on the
fl uorescent indicator tube (around 5 seconds).