Overview
System Components
9
CCFC-M100HG Optical Fiber Cable
This is a 2-core multi-mode optical fiber cable of 100 m
(328 feet) long.
Supplied accessories: extension plug
HFBK-SD1 SD Interface Board
Insert the board into the camera or the HD Optical
Multiplex Unit to allow output of an analog video signal
such as the composite video, S video, component video
and RGB signals, or a down-converted SD-SDI signal.
HFBK-HD1 HD Interface Board
Insert the board into the camera or the HD Optical
Multiplex Unit to allow output of a signal conforming to
SMPTE292M serial digital interface standards, or
output of an analog video signal (component/RGB).
HFBK-XG1 XGA Interface Board
Insert the board into the camera or the HD Optical
Multiplex Unit to allow output of a signal conforming to
the VESA standards (VGA, XGA or WXGA).
HFBK-TS1 HDV Interface Board
Insert the board into the camera or the HD Optical
Multiplex Unit to allow conversion of the video signal
from the camera and the input audio signal into the
signal conforming to the HDV standards.
BRBK-H700 HD Optical Multiplex Card
Insert the card into the camera to allow high-bit
multiplex transfer via optical fiber cable (video, audio,
external video sync and control signals).
Video Switcher (commercially available)
It switches the video signal input of multiple cameras.
To Next Page
Loading...
