Help Guide
IC Recorder
ICD-UX570F / ICD-UX575F
Recording with an external microphone
You can connect an external microphone to your IC recorder and use it for recording.
5-006-945-11(1) Copyright 2019 Sony Corporation
While no IC recorder operations are in progress, connect an external microphone (
) to the
(microphone) jack.
[Ext. Input Setting] appears on the display window. If not, select [ Settings] - [Recording Settings] - [Ext. Input
Setting] from the HOME menu.
1
Press
(move up) or (move down) to select [MIC IN], and then press (play).
If the recording level is not appropriate, select [
Settings] - [Recording Settings] - [Ext. Input Setting] from the
HOME menu and change the sensitivity level of the external microphone under [MIC IN]. For instructions on
changing the sensitivity level, see Selecting the audio input type and the sensitivity level of the external microphone
(Ext. Input Setting).
2
Press
REC/PAUSE to start recording.
The built-in microphones are disabled and audio via the external microphone is recorded.
When a plug-in-power type microphone is connected, power is automatically supplied to the microphone from the
IC recorder.
3
To Next Page
Loading...
