Help Guide
IC Recorder
ICD-UX570F / ICD-UX575F
Disconnecting the IC recorder from the USB AC adaptor
Be sure to follow the procedure below to disconnect the IC recorder, otherwise you may not be able to play the files
stored on your IC recorder due to data corruption.
Note
While recording is in progress (the operation indicator lights in red) or paused (the operation indicator flashes in red), or while
data is being accessed (the operation indicator flashes in orange), observe the following to avoid data corruption:
Do not connect/disconnect your IC recorder to/from the USB AC adaptor while the adaptor is connected to an outlet.
Do not connect/disconnect the USB AC adaptor to/from an outlet while your IC recorder is connected to the USB AC adaptor.
Related Topic
Using/Charging the IC recorder with the USB AC adaptor
5-006-945-11(1) Copyright 2019 Sony Corporation
If recording or playback is in progress, press
STOP.
1
Disconnect the IC recorder from the USB AC adaptor, and then disconnect the USB AC adaptor from the
outlet.
2
To Next Page
Loading...
