If you set [Full Time DMF] to [On], you can perform manual focusing operations regardless of the focus mode setting.
You can use both the auto and manual focus without changing the focus mode setting.
(You cannot switch to manual focus while shooting continuously in the [Continuous AF] mode.)
Hint
In [Continuous AF] mode, you can lock the focus by pressing and holding the button that has been assigned the [Focus Hold]
function.
When you set the focus to infinity in [Manual Focus] mode or [DMF] mode, make sure that the focus is on a sufficiently distant
subject by checking the monitor or the viewfinder.
Note
When [Continuous AF] is set, the angle of view may change little by little while focusing. This does not affect the actual recorded
images.
Only [Continuous AF] and [Manual Focus] are available when shooting movies or when the Still/Movie/S&Q dial is set to
(Movie) or S&Q (S&Q Motion).
Related Topic
Focus mode dial
Direct manual focus (DMF)
Manual Focus
Full Time DMF
Selecting the focus area (Focus Area)
Assigning frequently used functions to buttons and dials (Custom Key/Dial Set.)
TP1001159195
5-056-662-11(1) Copyright 2023 Sony Corporation
To Next Page
Loading...
