MHC-V50/V50D
7
HOW TO OPEN THE TRAY WHEN POWER SWITCH TURN OFF
Note 1: After the side panel and top panel are removed, this work is done.
Note 2: Please prepare the thin wire (clip etc. processed to the length of 8 cm or more).
8 cm or more
– Top view –
CD/DVD mechanism deck
tray
Insert the clip etc. processed to the
length of 8 cm or more in the hole
on the side of the CDM and push.
Note: Push after it inserts it
in this hole well.
1 Remove the side L, R panel, top panel section.
(Illustration of disassembly is omitted.)
– Left view –
hole
2 Insert the clip etc.
3
To Next Page
Loading...
