47-GB
4 Press >MENU. repeatedly to select a letter and press
ENTER.
The selected letter stops flashing and the cursor moves to the
next input position.
5 Repeat step 4 and enter all characters of the label name.
To cancel labeling, press x or T MARK
6 Press ENTER for 2 seconds or more.
The track or disc is labeled.
Labeling a track during playback
1 Insert a disc and play the track you want to label.
2 Press ENTER so that “EDIT” flashes in the display, and then
press ENTER again.
“ :Name” flashes in the display.
3 Press ENTER.
The track is ready to be labeled.
4 Follow steps 4 to 6 of “Labeling a disc during stop”.
Press To
X Switch between capital letters, small
letters and marks / numbers.
VOL +/– Move the cursor to the left or right.
./> Change the letter to the one before / next
one.
END SEARCH/
VOL +
Insert a blank space to type in a new
letter pressing both buttons together.
END SEARCH/
VOL –
Delete a letter and move back all
following letters to the left pressing both
buttons together.
x Cancel labeling.
T MARK Cancel labeling.
To Next Page
Loading...
Need help?
General