Sony PMW-300 - Hinge Assembly

2-3-8. Hinge Assembly
Procedure
1. Remove the two screws to detach the VF arm assembly.
P 2.6 x 4
P 2.6 x 4
VF arm assembly
Holes
Bosses
Note
When installing the VF arm assembly, fit the two bosses with the two holes.
2. Remove the three screws to detach the hinge assembly.
P 2.6 x 4
Hinge assembly
Holes
Bosses
Note
When installing the hinge assembly, fit the two bosses with the two holes.
PMW-300
2-17