Sony RDP-M5iP User Manual

16
To power on the System
1) Looking at the top of the System, locate the power I / button. See Figure 10 below.
Figure 10 - Power Button and OPR/BATT Light
2) Press I / .
3) Looking at the top of the System, confirm that the OPR/BATT light is green. See
Figure 10 above.
The System powers on.
You can also power on the System using the remote commander. See “To power on the
System” under the “Operating the Sony Personal Audio Docking System Remotely” section.
Playing your Music
Playing your music is a procedure that shows you how to play music stored on your iPod or
iPhone using the System. The procedure provides you with step-by-step instructions and
graphics to help you learn how to complete this task. Playing your music allows you to start
listening to music stored on your iPod or iPhone, without having to use ear buds.
Power I /
Button
OPR/BATT
Light

Sony RDP-M5iP Specifications

General

Driver diameter	50 mm
Frequency range	- Hz
RMS rated power	4 W
Audio output channels	2.0 channels
AUX in	Yes
Bluetooth	No
Headphone connectivity	-
Apple docking compatibility	iPhone, iPod
Battery type	AAA
Battery voltage	1.5 V
AC input voltage	100 - 240 V
Power source type	AC, Battery
Battery life (max)	10 h
Battery technology	Alkaline
Number of batteries supported	4
Product color	Black
Volume control	Digital
Speaker power	2 W
Dimensions (WxDxH)	226 x 184 x 165 mm

Weight and Dimensions

Weight	1100 g