Sony RDP-M5iP User Manual

28
To pause/un-pause your music
1) Point the remote commander at the remote sensor on the front of the System (see
Figure 14).
2) On the remote commander, locate the play/pause button (ensure the music is
playing). See Figure 21 below.
Figure 21 - Remote Commander Play/Pause Button
3) Press on the remote commander.
The music stops playing.
4) To un-pause the music, press again on the remote commander.
The music starts playing again.
Adjusting the Volume for your Music
Adjusting the volume for your music is a procedure that shows you how to decrease and
increase the volume using the remote commander. The procedure provides you with step-by-
step instructions and graphics to help you learn how to complete this task. Adjusting the
volume for your music using the remote commander enables you to decrease the volume if
you are talking to someone on the phone, as well as increase the volume if you move to
another room or location–all done from your comfy chair.
Play/Pause
Button

Sony RDP-M5iP Specifications

General

Driver diameter	50 mm
Frequency range	- Hz
RMS rated power	4 W
Audio output channels	2.0 channels
AUX in	Yes
Bluetooth	No
Headphone connectivity	-
Apple docking compatibility	iPhone, iPod
Battery type	AAA
Battery voltage	1.5 V
AC input voltage	100 - 240 V
Power source type	AC, Battery
Battery life (max)	10 h
Battery technology	Alkaline
Number of batteries supported	4
Product color	Black
Volume control	Digital
Speaker power	2 W
Dimensions (WxDxH)	226 x 184 x 165 mm

Weight and Dimensions

Weight	1100 g