Sony RDP-M5iP User Manual

20
Powering off the System
Powering off the System is a procedure that shows you how to manually power off the System.
The procedure provides you with step-by-step instructions and graphics to help you learn how
to complete this task. Powering off the System, when the System is not in use, enables you to
save hydro costs or battery costs.
To power off the System
1) Looking at the top of the System, locate the power I / button. See Figure 13 below.
Figure 13 - Power Button and OPR/BATT Light
2) Press I / .
3) Looking at the top of the System, confirm that the green OPR/BATT light is off. See
Figure 13 above.
The System powers off.
You can also power off the System using the remote commander. See “To power off the
System” under the “Operating the Sony Personal Audio Docking System Remotely” section.
Power I /
Button
OPR/BATT
Light

Sony RDP-M5iP Specifications

General

Driver diameter	50 mm
Frequency range	- Hz
RMS rated power	4 W
Audio output channels	2.0 channels
AUX in	Yes
Bluetooth	No
Headphone connectivity	-
Apple docking compatibility	iPhone, iPod
Battery type	AAA
Battery voltage	1.5 V
AC input voltage	100 - 240 V
Power source type	AC, Battery
Battery life (max)	10 h
Battery technology	Alkaline
Number of batteries supported	4
Product color	Black
Volume control	Digital
Speaker power	2 W
Dimensions (WxDxH)	226 x 184 x 165 mm

Weight and Dimensions

Weight	1100 g