29
To adjust the volume for your music
1) Point the remote commander at the remote sensor on the front of the System (see
Figure 14).
2) On the remote commander locate the minus volume button and the plus volume
button. See Figure 22 below.
Figure 22 - Remote Commander Minus and Plus Volume Buttons
2) Press continuously on the remote commander to decrease the volume to the desired
level.
The volume decreases to the selected level.
3) Press continuously on the remote commander to increase the volume to the desired
level.
The volume increases to the selected level.
The OPR/BATT indicator flashes three times when the sound is set to either maximum or
minimum volume.
Button
Button
To Next Page
Loading...
