21
Operating the Sony Personal Audio Docking System Remotely
This section of the user manual tells you about the basic operations that are available
operating the System remotely, how to perform each operation, and how each operation can
be used to your benefit. Operating the System remotely using the remote commander is more
challenging than using the System manually.
With the remote commander you can do the same basic operations remotely that you can do
manually such as: powering on the System, playing your music, pausing/un-pausing your
music, adjusting the volume for your music, and powering off the System. One additional task
you can do using the remote commander, however, is selecting a track to play from your iPod
or iPhone. Using the System remotely allows you greater convenience and flexibility. You can
adjust the volume, select a different song, or perform another operation using the remote
commander from across the room. This saves you time and energy–you don’t have to keep
getting up out of your comfy chair to perform an operation.
The purpose of this section is to show you how to use the System remotely using the remote
commander to perform basic operations. You will learn about:
• Powering on the System
• Playing your music
• Selecting a track to play from your iPod or iPhone
• Pausing/un-pausing your music
• Adjusting the volume for your music
• Powering off the System
Powering on the System
Powering on the System is a procedure that shows you how to power on the System using the
remote commander. The procedure provides you with step-by-step instructions and graphics
to help you learn how to complete this task. Powering on the System with the remote
commander alleviates the need for you to get up out of your comfy chair to turn the System
on.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
